Your slogan here

Automatic Drain Valve For Air Compressor

Drain-AllŪ Condensate Drains have been the industry leader for over 20 years. The unit is suitable for a wide range of compressed air system components such as aftercoolers, dryers, filters, pressure vessels & piping systems regardless of their size or capacity - simply adjust the interval and discharge times to suit the particular compressed air system.
Having both ports open at the same time would permit the air pressure within the fire protection system to flow directly through the valve. condensate drain valve This includes timer controlled drains and level sensing drains , which can be powered electrically, magnetically, or pneumatically.

The electronic capacitive sensor probe placed inside the drain reservoir controls the discharge by initiating the discharge command to a built-in indirect operated solenoid valve When the condensate reaches the probe, the solenoid valve is actuated and opens.
The seats for the Double L” flow control element should have sealing faces that are at least as wide as the diameter of the corresponding port in the flow control element—ultra-high molecular weight polyethylene (UHMWPL) is a possible material for the seals.

They reduce the need of operation of manual valves and the possiblity of damage and accident by condensate accumulation, and contribute to a better performance of the plant. We help you remove condensate from your compressed air and achieve the optimum quality for your application: with the BEKOMAT.
Trident condensate sensing type drain valves are highly efficient and reliable. As the name suggests, manual drain valves are opened manually to evacuate the accumulated condensation. It's out of sight and out of mind, so it's easy to forget to change it. Yet, every year we go on service calls where the air conditioner isn't cooling and the cause is restricted air flow from an extremely dirty filter.
Alternatively, the actuator may powered by a motor, solenoid, ram or other kind of actuator which can move the valve from collect” to drain” to perform the drain function in response to an electrical, hydraulic or pneumatic control signal. As used herein, the term ‘integral' means a part of or attached to the valve case while the valve is in use, even though the collection chamber may be removable for assembly or maintenance or other reasons.

This website was created for free with Would you also like to have your own website?
Sign up for free